Update to any later than 0099 BIOS version. Then you must then update to version 0099 before upgrading to any later BIOS, using one of these methods. 8.Remove the thumb drive from the USB port.Ĭonfirm that ME version 8.x has been installed See the Technical Product Specification for details including the location of this jumper.Ħ.Wait 2-5 minutes for the update to complete.ħ.System will either turn off when the recovery process is completed or it will prompt you to turn off the system. Use this method if the recovery file (*.BIO) is too large to fit on a floppy disk or if the desktop board does not include floppy drive support.ġ.Copy the recovery file (*.bio) to a bootable USB thumb drive.Ģ.Place the thumb drive in a USB port of the target system.ģ.Shut down the system and unplug AC power.Ĥ.Open the chassis and remove the BIOS Configuration Jumper. Instructions for Recovery BIOS Updates (only if If the Intel ME version is 7.x) If the Intel ME version is 7.x, use the BE0048.BIO file to do a BIOS Recovery and then check the Intel ME Firmware version again to confirm that version 8.x has been installed pdf)ġ.You must first update to version 0048, using one of these methods:Ĭheck if the Intel Management Engine (Intel ME) Firmware is version 7 or 8.Ī)Press F2 during boot to enter BIOS Setup.ī)Go to the Main > System Identification Information screen You must first update to version 0048, using one of these methods:Ĭheck if Intel Management Engine is. If the computer’s current BIOS version is earlier than 0048:ġ. Then update to version 0099 before updating to any later BIOS version, using one of these methods:Ĥ. If the Intel ME version is 7.x, use the BE0048.BIO file to do a BIOS Recoveryand then check the Intel ME Firmware version again to confirm that version 8.x has been installed.ģ. Check if the Intel Management Engine (Intel ME) Firmware is version 7 or 8.Ī) Press F2 during boot to enter BIOS Setup.ī) Go to the Main > System Identification Information screenĢ. If the computer’s current BIOS version is 0048:ġ. Attempting a BIOS downgrade to a previous version may fail –the board BIOS will remain at its current version. Due to structural changes in version 0099, once a board has been converted to 0099 or later, it will no longer be possible to downgrade the BIOS to version 0048 or earlier. NOTE: Before updating the BIOS on the Intel?Desktop Board, manually record all BIOS settings that have been changed (from default) so they can be restored after completing the BIOS update.You should know what the current BIOS version and Management Engine (ME) version are before attempting flash.īIOS version 0099 added support for Microsoft Windows 8*.CAUTION!!! DO NOT POWER DOWN YOUR SYSTEM before the update is complete.Boot the target PC with the floppy disk in the floppy drive to automatically launch the BIOS update process. Save the file to a temporary directory and double-click the *.EXE to extract necessary files, then double-click the RUN.BAT file to create the BIOS update floppy disk. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |